Application Information Disclaimer

PURE Hard Surface™ is intended to sanitize and disinfect hard surfaces. The approved manufacturer’s application method is 18″-24″ above the surface, sprayed with an approved applicator, at a rate of 2-3′ per second. This method will allow the mist to fall on the desired surface at a rate of 15PPM. Do not overspray or this may lead to a tackiness. Any tackiness may be removed with standard cleaners. Overapplying PURE Hard Surface™ does not improve the effectiveness. This product is meant for hard surfaces and may cause damage to electronics, concrete or any porous surface and fabrics. User is encouraged to use caution or cover any item that may be damaged. Please read the below information and agree that you have read and understand the application process for PURE Hard Surface™. ADS Supply Inc. has also linked several videos to assist our customers in the application process. If you have any questions, you are encouraged to call us at 888-788-2377. Thank you again for your order and protect yourself with PURE Hard Surface™!


  • What is PURE Hard Surface™?

    PURE Hard Surface™ is a colorless, odorless, ready-to-use disinfectant and sanitizer for use on hard, non-porous environmental surfaces, including food contact surfaces. PURE Hard Surface™ offers broad spectrum efficacy coupled with 24 hour residual protection.

  • What does 24 hour residual protection mean?

    PURE Hard Surface™ has demonstrated effectiveness against Staphylococcus aureus, Pseudomonas aeruginosa and Salmonella enterica for up to 24 hours after initial application. Refer to the product labeling for specific use instructions. In our extensive research, we have found no other product on the market that the EPA has registered and allowed residual claims against specific pathogenic organisms.

  • Is PURE Hard Surface registered with the US EPA?

    Yes, PURE Hard Surface™ is registered with the EPA under The Federal Insecticide, Fungicide and Rodenticide Act (FIFRA) and with all 50 states, the District of Columbia and Puerto Rico. The PURE Hard Surface™ EPA registration number is 72977-5-73912.

  • What is the difference between disinfection and sanitization? Why is disinfection better?

    Contrary to popular belief, disinfection is better than sanitization for treatment of hard surfaces. Disinfection is a complete kill (greater than 99.9999%) of the organisms in question. Non-food surface sanitization is only a reduction (99.9%). Even though a product may ‘sanitize’, hundreds of pathogenic organisms may remain on a surface, exposing people to these disease-causing organisms. Many products claim 30-second sanitization, but PURE Hard Surface™ is one of the few that can claim 30-second disinfection. In addition, PURE Hard Surface™ is EPA registered for use as a no-rinse sanitizer on food contact surfaces, which requires a 99.999% reduction of the specified organisms within 30 seconds.

  • Does the 24 hour residual work if I wipe up PURE Hard Surface per the label instructions?

    Yes, residual protection will still be imparted to the surface even after wiping up PURE Hard Surface™ as directed by the EPA-approved label instructions.

  • What is the shelf life of PURE Hard Surface?

    PURE Hard Surface™ should be used within two years of the date of purchase.

  • How much surface area will PURE Hard Surface disinfect?

    A 1-gallon bottle of PURE Hard Surface™ will disinfectant nearly 4,400 Sq. Ft of surface area, applied at a 15ppm rate per instructions.

  • Is PURE Hard Surface also a cleaner?

    PURE Hard Surface™ can be used for general cleaning and to help wipe up water soluble spills, but it has not been designed to be used for cleaning up oil or grease spills.


Contact Information

Questions about the Terms and Conditions should be sent to us at


ADS Supply Inc.
305 Magnolia Lake Court
Aiken, SC 29803